Using the Image Editor

Follow

Adding a Filter

*Only one filter can be applied to a photo within the Image Editor.

  1. Select the "Filter" option within the Photo Editor
    filter.png
          
  2. Scroll from right to left, and tap on the filter to select it
    filter-scroll.png
          
  3. You can change the default strength of the filter by sliding the circular toggle from left to right.  
    filter-strenght.png
          
  4. save.png  SAVE:  Select the check mark located in the bottom RIGHT hand corner
  5. exit.png  DON'T SAVE AND EXIT FILTER SCREEN:  Select the X in the bottom LEFT hand corner
    *This will take you back to your main editor dashboard.

Adding a Sticker

      1. Select the "Sticker" option within the Photo Editor
        sticker.png
               
      2. You will have two options for sticker use:
        Emojis Objects
        Photo_Dec_15__3_54_22_PM.png Photo_Dec_15__3_54_06_PM.png
               
      3. Tap on the sticker you would like to use
      4. This will place the sticker in the middle of the image, from here you can:
        1. Resize the sticker
        2. Move the sticker location

Resizing the Sticker

  1. Once you've added a sticker, the sticker will be placed in the middle of the image at a default size
  2. You can tap on the sticker within the image to select it (you should see a box outline the image letting you know it was selected):
    selected-sticker.png

Enlarge a Sticker: 

  1. Place two fingers down directly on the sticker selected
  2. Slide your fingers further apart to enlarge the sticker
    enlarge-sticker.png

  3. With the end result of the sticker increased in size
  4. Select the "Check Mark" icon located in the bottom right hand corner to save the changes made to your sticker
    big-final.png

To Reduce a Sticker's Size:

  1. Place two fingers down on the sticker selected
  2. Slide your fingers inward to decrease the sticker
    pinch-in-sticker.png
            
  3. With an end result of the sticker reduced in size
  4. Select the "Check Mark" icon located in the bottom right hand corner to save the changes made to your sticker.
    final-small.png

Moving the Sticker

  1. You can tap on the sticker within the image to select it (you should see a box outline the image letting you know it was selected):
    selected-sticker.png
          
  2. Select and hold down on the image as you move the sticker anywhere on the image
    move-sticker.png
           
  3. Once you lift your finger, the image will stay positioned where you leave it
  4. Select the "Check Mark" icon located in the bottom right hand corner to save the changes made to your sticker.
    save-sticker.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk